Confidant RFID



The Confidant RFID door lock offers contactless RFID technology to enhance guest convenience and improve operational efficiency. This RFID solution offers keycard auditing capabilities for enhanced staff monitoring & user accountability.

The Confidant RFID works with both the web-based ATLAS and the stand-alone portable Front Desk Unit (FDU).


Mechanical Features 
Outside HousingZinc cast alloy construction with steel mounting plate / Field reversible levers
Ergonomic RFID reader with target to guide user / LEDs for visual feedback
Panel that conceals key cylinder (if used), lock batteries (3 alkaline AA type) and
programming interface
Mounting posts (standard back plate or rosette mounting configuration)
Spindle socket
Inside HousingSteel trim with a steel mounting plate construction / Field reversible levers
Cylinder clearance hole (optional)
Privacy turn knob, required only when there is no cylinder (optional)
LeversAvailable in long return or short return designs
Outside lever free to rotate upward and downward in locked mode
DIN compliant levers (optional)
Standard FinishesSatin chrome or satin brass
Batteries3 AA batteries for up to 120,000 openings or approximately 2 to 3 years (based on 10
openings per day). Low battery indicator: alerts staff that batteries need to be changed soon
Target DoorsThickness: 35 mm – 60 mm
Minimum backset: 45 mm or more
Wood or metal, hollow or solid
Rosette mounting option eliminates the need for drilling (retrofit scenario)
Interior or exterior
Kit 1: Includes outside lock housing and installation hardware kit
Kit 2: Includes outside lock housing, inside lock housing and installation hardware kit
Kit 3: Includes outside lock housing, inside lock housing, lock case and installation
hardware kit (cylinder and key optional)
Compatible Lock CasesA) Distance between mortise drive and cylinder: 70mm to 92mm
B) Backset: minimum 45 mm
C) Spindle size : 7mm, 8mm, 8.5mm or 9mm square
D) Case length: 135mm to 200mm
E) Distance between drive and top: 30mm to 80.5mm
Cylinder type Euro profile or Swiss
Security FeaturesVandalism and attack resistant
Emergency access: emergency keycard
Mechanical key and electronic override
Low Maintenance

Operates with a completely sealed contactless reader

Batteries last 2 to 3 years

Low battery indicator alerts staff

Lock audit not erased during battery replacement

Wear resistant construction and finish

Upgradeable lock firmware


  • Easily replaces existing mechanical or electronic door locks
  • Access control for guest rooms, common areas, and back-of-the-house

Technical Data

Lock Operation 
Date/Time StampReal time: date and hours/minutes
Programming and
Audit Trail Downloading
Can be done using a 4K audit keycard or by using Kaba M-Unit or FDU
Pre-registered KeycardsUp to 10 days in advance
Keycard ExpiryFrom 1 hour to 7 years, depending on type and setup
Passage ModeSet by authorized keycard
Lockout ModeSet by authorized keycard
Keycards AcceptedRFID cards or tags (ISO14443A with Mifare Classic) available in Mini, 1K
and 4K memory sizes (4 byte UID type)
Feedback“Dual sensory” audible and visible indicators
DiagnosticsBuilt-in battery voltage meter and lock version display
Audit MemoryLast 2000 transactions stored in lock (lock audit can be retrieved using M-unit
or FDU or using lock audit keycard)
Disability FeatureExtended unlock time (4 seconds standard, 15 seconds for disability)
Privacy OverrideBy guest keycard user selectable (with Privacy Inside Housing option)
Certifications and Testing 
Fire RatingDesigned to comply with the following standards:
EN 1906 grade B and EN 14846 grade E (90 minutes) both referencing to NF EN 1634-1
UL 10C (3 hours on steel door and 20 minutes on wood door)
DIN 18273, with special levers and cylinder
Compliant door and lock case must be used
ElectronicsCompliant and listed to CE 61000-4 and FCC Part 15
Environmental Operating
-35°C to 70°C
0% to 90% non-condensing humidity
Designed for IP54 rating for dust and elements on IEC 60529